Z-Wave Plus NEO Electronics Door Sensor

Есть в наличии
SKU
NEO_NAS-DS01Z
Начиная с 1 990,00 руб.

Z-Wave Door Sensor features

  • Low battery notifications
  • Z-Wave Plus Certified

Door sensor is an intelligent security equipment that can transmit through Z-Wave network and radio waves. In the ZWave network communications, door sensor can be connected to any Z-Wave gateway. Door sensor can send messages to Z-Wave gateway, then realize association with other devices. Different countries or areas, the radio frequency is different.

Each door sensor has a unique ID code. When we add or remove door sensor from gateway, just place it in the z wave network range of gateway. Then we can easily find the door sensor through device ID code. In the communication with ZWave gateway, door sensor can only send messages to ZWave gateway, but can not receive messages. When alarm is triggered, door sensor would send messages to gateway,
then Z-Wave gateway would display the current status of door sensor. At the same time, door sensor can realize association with other devices through Z-Wave gateway.

Door sensor is powered by batteries, with small body , and can be installed on the window or door easily. When door or window is open, door sensor would be triggered, then associates with other devices to work, to realize the goal of safety protection.

z-wave neo door sensor

z-wave neo door sensor

z-wave neo door sensor

z-wave neo door sensor

z-wave neo door sensor

Радиус действия

Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.

Поколение 5

Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.

Безопасность

Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.

Беспроводное обновление

Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.

technical-specifications

Technical Specification

  • MODEL NUMBER
    • NAS-DS01Z
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • Z-WAVE GROUPS
    • Four groups and five devices (nodes)
  • DETECTION
    • Magnetic
  • DIMENSIONS
    • Packing size:100x100x20 mm (LxWxH)
    • Base main body size: 70mmx20mmx20mm (LxWxH)
    • Base deputy body size: 40mmx11mmx11mm (LxWxH)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY
    • CR14250(3.0V)
  • BATTERY CHARGER INPUT
    • Micro USB port, DC 5V±0.5V, max 1A
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 150m (outdoors) and 100m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-40°C
  • RELATIVE HUMIDITY: 
    • 8% - 80%.
  • IP CODE
    • IP20

Package content

  • Unit:
    • Door sensor main body
    • Door sensor deputy body
    • Battery
    • Screw (x4).
    • Screw stopper (x2). 
    • Sticker (x2)
  • User manual

Additional Info

Z-Wave Association Capabilities

Model: Door Sensor (NAS-DS01Z)

Z-Wave Certification Number: ZC10-16055076


Group ID

Maximum Nodes

Description

1 5 GROUP 1 is lifeline service that assigned to Sensor (Door/Window detector) status – Open/Close. It enables the sensor to send reports and readings to Z-Wave Controller or Z-Wave Gateway whenever the sensor is triggered. This Group Support: NOTIFICATION_REPORT BATTERY_REPORT SENSOR_BINARY_REPORT DEVICE_RESET_LOCALLY_NOTIFICATION
2 5 GROUP 2 allows for sending control commands to associated devices such as relay module, lighting, etc. This association group is configured through the advanced parameters no. 1 and 2. This Group Support: BASIC_SET.
3 5 GROUP 3 allows for Send Notification to associated devices in this group. This Group Support: NOTIFICATION_REPORT
4 5 GROUP 4 allows for Send Notification to associated devices in this group. This Group Support: SENSOR_BINARY_REPORT

Z-Wave Command Classes

Model: Door Sensor (NAS-DS01Z)

Z-Wave Certification Number: ZC10-16055076


Supported Command Classes
 
        Association Group Information
        Association V2
        Battery
        Configuration
        Device Reset Local
        Manufacturer Specific
        Notification V4
        Powerlevel
        Sensor Binary V2
        Version V2
        Wake-Up V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic


Z-Wave Configuration Capabilities

Model: Door Sensor (NAS-DS01Z)

Z-Wave Certification Number: ZC10-16055076


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 2 Configuring the OFF Delay 0
(Default)
0 ~ 65535 (in seconds, each 1s).

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 1 Basic Set Level 0 OFF, Alarm cancelling or turning a device off
  1 ~ 99 or 255
(Default)
ON (Binary Switch Device) Dim Level (Multilevel Switch Device)



User manual

Guides

  • Guides
Дополнительная информация
Технология Z-Wave+
Z-Wave Plus: Нет
Z-Wave аппаратная платформа ZM5101
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства Notification Sensor
Z-Wave тип роли Reporting Sleeping Slave
Группы ассоциаций 4
Производитель NEO Electronics
Тип датчика геркон
Z-Wave Функции Power Level
Внутренняя/наружная установка Внутренняя
Источник питания Батарея
Тип батареи CR14250
Форм-фактор Настенный
Назначение Закрытие и отслеживание состояния двери
OTA обновление прошивки Нет
Напишите ваш собственный отзыв
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2009-2020 Swinestudio. All rights reserved.