Z-Wave Plus Philio Temperature and Humidity Sensor

Есть в наличии
SKU
PHI_PAT02-B
Начиная с 4 290,00 руб.

Z-Wave Philio 2 in 1 Temperature / Humidity Sensor - Gen5

  • Integrated Humidity and Temperature Sensor
  • Extremely low power consumption
  • Higher output power to enhance the communication range
  • Slim, small and elegant
  • Tamper switch included
  • Very easy to install
  • Z-Wave Plus Certified

The flood multisensor PAT02 has temperature and humidity, 3 sensors function in one, based on Z-WaveTM technology.

Z-Wave Philio 2 in 1 Temperature / Humidity Sensor measures humidity in percentage and temperature in Celsius degrees of its environment. The sensor has included tamper switch that works as a burglar alarm. By using Z-Wave all the information is transfered to the Gateway.

The 2-in-1 Sensor can be mounted on almost any surface in horizontal or vertical position. The sensor has a casing with a barred aperture for the measurement of the humidity. On the backside of the case there is the tamper switch that works as burglar alarm if the device is moved or manipulated.

With the Philio sensors you can easily make your home smarter and safer. The sensors are sleek, small and inconspicuously and fit on any surface. If you want to protect your home from burglars or other hazards like fire or water you can easily integrate the Philio Sensors to your Z-Wave Smart Home system.


Радиус действия

Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.

Поколение 5

Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.

Безопасность

Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.

Беспроводное обновление

Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.

technical-specifications

Technical Specification

  • MODEL NUMBER
    • PAT02-1B
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • FEATURES
  • LED AND BUTTONS
    • Push-button: Wake-up, inclusion and exclusion
    • LED indication
  • Z-WAVE GROUPS
    • One group and eight device (nodes)
  • SENSOR
    • Humidity
    • Temperature: -10 - +40°C (±0.5°C within 0°C C-40°C range)
  • DIMENSIONS
    • Packing size: (LxWxH)
    • Base size: (LxWxH)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY
    • CR123A battery, 3.0V DC
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 150m (outdoors) and 100m (indoors)
  • OPERATIONAL TEMPERATURE RANGE
    • -10-40°C  
  • OPERATIONAL HUMIDITY: 
    • 80%
  • IP CODE
    • IP20

Package content

  • Unit:
    • Sensor Unit
    • Double-Sided Tape
    • Screws
  • User manual

Additional Info

Z-Wave Association Capabilities

Model: Temperature and Humidity sensor (PAT02-1B)

Z-Wave Certification Number: ZC10-15060010


Group ID

Maximum Nodes

Description

1 8 The group 1 is for receiving the report message, like triggered event, temperature, humidity etc. And each group support 8 nodes maximum.

Z-Wave Configuration Capabilities

Model: Temperature and Humidity sensor (PAT02-1B)

Z-Wave Certification Number: ZC10-15060010


Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 Auto Report Battery Time 0 to 127
(Default)
The interval time for auto report the battery level.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

13 1 Auto Report Temperature Time 0 to 127
(Default)
The interval time for auto report the temperature.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

14 1 Auto Report Humidity Time 0 to 127
(Default)
The interval time for auto report the humidity.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Auto Report Tick Interval 0 to 255
(Default)
The interval time for auto report each tick.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

21 1 Temperature Differential Report 0 to 127
(Default)
The temperature differential to report. 0 means turn off this function.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

23 1 Humidity Differential Report 0 to 60
(Default)
The humidity differential to report.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

5 1 Operation Mode 8 Setting the temperature scale. 0: Fahrenheit, 1:Celsius

Parameter Number

Parameter Size

Parameter Name

Parameter Values

7 1 Customer Function 32 Disable Multi CC in auto report. (1:Disable, 0:Enable)
  16 Notification Type, 0: Using Notification Report. 1: Using Sensor Binary Report.

Z-Wave Command Classes

Model: Temperature and Humidity sensor (PAT02-1B)

Z-Wave Certification Number: ZC10-15060010


Supported Command Classes
 
        Association
        Association Group Information
        Battery
        Binary Sensor
        Configuration
        Device Reset Local
        Firmware Update Meta Data
        Manufacturer Specific
        Multi-Command
        Multilevel Sensor
        Notification
        Powerlevel
        Security
        Version
        Wake Up
        ZWavePlus Info
 
 
Controlled Command Classes
 
        Wake Up

User manual

Guides

  • Guides
Дополнительная информация
Технология Z-Wave+
Z-Wave Plus: Нет
Z-Wave аппаратная платформа SD3502
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства Notification Sensor
Z-Wave тип роли Reporting Sleeping Slave
Группы ассоциаций 1
Производитель Philio
Тип датчика мультисенсор, температуры, влажности
Z-Wave Функции Запуск сцен, Power Level
Внутренняя/наружная установка Внутренняя
Источник питания Батарея
Тип батареи CR 123
Форм-фактор Настенный
Назначение Отслеживание температуры, влажности, освещенности
OTA обновление прошивки Да
Напишите ваш собственный отзыв
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2009-2020 Swinestudio. All rights reserved.