Z-Wave Plus Philio Smart Energy Plug-in Switch
- Measures electricity consumption of connected appliance
- Auto report the power wattage
- Overload protection
- RGB LED instant power indication
- Turn devices on and off by wireless or by manual switch on the module
- Support up to 3000W resistive load
Радиоадаптер для розетки предназначен для дистанционного включения и выключения электрических приборов (например вентиляторов), ламп в квартире, офисе или загородном доме. Электроприбор, которым вы хотите управлять, подключается к электросети через радиоадаптер, после чего управлять им можно любыми контроллерами Z-Wave (пультами дистанционного управления и настенными передатчиками).
Кроме того, адаптер способен определять напряжение, измерять электрическую мощность потребляемую этой нагрузкой (Вт*ч) и измерять потребляемую электроэнергию (кВт*ч), а также распознать возможную перегрузку (3010 ~ 3300Вт) подсоединенных электрических устройств. При обнаружении перегрузки, модуль выключается, а светодиод будет мигать в течение 30 секунд.
This plug-in ON/OFF switch PAN16 is a security enabled Z-Wave Plus product, based on Z-Wave Plus technology. The device will enable security mode automatically if the controller supports security mode, too. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z-WaveTM enabled networks. Remote On/Off control of the connected load is possible with other manufacturer’s wireless Controller. Each switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Because PAN16 supports Security Command Class, it can learn with a Secured enabled Z-Wave controller to fully utilize the device. Its functionality and supported command classes is identical when included as a secure and non-secure device.
This plug-in ON/OFF switch is able to detect instance wattage (3000W/230Vac) (13Ampere) and overload current (14.5A with resistive load) of connected lights or appliances. When detecting overload state, the Switch will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, unplug and re-connect the switch will reset its overload condition to normal status.
Adding to Z-WaveTM Network
In the front casing, there is an On/Off button with LED indicator which is used to toggle switch on and off or carry out inclusion, exclusion, reset or association. When first power is applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion.
Auto Inclusion
The function of auto inclusion will be executed as long as the switch does not have Node ID and just plug the switch into a wall outlet.
Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the Switch.
Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.
Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.
Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.
Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.
Technical Specification
- MODEL NUMBER
- PAN16
- HARDWARE
- Z-Wave Chip 500 series
- FEATURES
- Onboard storage of accumulated energy consumption
- Reports when power usage exceeds preset value
- Overload protection
- RGB LED instant power indication
- LED AND BUTTONS
- LED indicator and button for pairing
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- Z-WAVE GROUPS
-
- One group and one device (nodes)
- MAXIMUM CURRENT
- 13A (Resistive load)
- MAXIMUM LOAD
- AC 220V-240V: 3000W
- OVERCURRENT PROTECTION
- No
- DIMENSIONS
- Packing size: (LxWxH)
- Base size: 43x 43x 65mm (DxH)
- CERTIFICATIONS
- CE, Z-Wave
- POWER SUPPLY INPUT
- Input: AC 220V-240VAC, 50-60Hz
- USB POWER OUTPUT
- No
- POWER CONSUMPTION
- up to 0.5W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- 0-40°C
- OPERATIONAL HUMIDITY
- 8% - 80%
- IP CODE
- IP20
Package content
- Unit
- User manual
Additional Info
Z-Wave Association Capabilities
Model: Smart energy plug in switch (PAN16-1)
Z-Wave Certification Number: ZC10-16105251
Group ID |
Maximum Nodes |
Description |
1 | 1 | Z-Wave Plus Lifeline The Switch can be set to send reports to associated Z-Wave devices. It supports one association group with one node support for Grouping 1. For group 1, the Switch will report its latest status to Z-Wave Controller. Grouping 1 includes, SWITCH_BINARY_REPORT, METER_REPORT, ALARM_REPORT, DEVICE_RESET_LOCALLY_NOTIFICATION. |
Z-Wave Configuration Capabilities
Model: Smart energy plug in switch (PAN16-1)
Z-Wave Certification Number: ZC10-16105251
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 2 | Watt Meter Report Period | 1 to 32767 (Default) |
720*5s=3600s=1 hour | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
11 | 1 | Manual Switch Report mode | 0 | 0 : Disable | |
1 (Default) |
1 : Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 2 | KWH Meter Report Period | 1 to 32767 (Default) |
6*10min=1 hour | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 2 | Threshold of current for Load Caution | 10 to 1300 (Default) |
1300*0.01A = 13A | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
4 | 2 | Threshold of KWh for Load Caution | 1 to 10000 (Default) |
10000*1KWH=10000KWH | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
5 | 1 | Restore switch state mode | 0 | 0 : Switch off | |
1 (Default) |
1 : Last switch state | ||||
2 | 2 : Switch on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
6 | 1 | Mode of switch off function | 0 | 0 : Disable | |
1 (Default) |
1 : Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
7 | 1 | LED indication mode | 1 (Default) |
1 : Show switch state | |
2 | 2 : Show night mode | ||||
3 | 3 : One flash mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
8 | 2 | Auto off timer | 0 (Default) |
0 : Disable auto off function | |
1 to 32767 | 1s ~ 32767s | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
9 | 1 | RF off command mode | 0 (Default) |
0 : Switch off | |
1 | 1 : Ignore | ||||
2 | 2 : Switch toggle | ||||
3 | 3 : Switch on |
Z-Wave Command Classes
Model: Smart energy plug in switch (PAN16-1)
Z-Wave Certification Number: ZC10-16105251
Supported Command Classes |
Alarm |
All Switch |
Association Group Information |
Association V2 |
Basic |
Configuration |
Device Reset Local |
Firmware Update MD V2 |
Manufacturer Specific V2 |
Meter V3 |
Powerlevel |
Protection V2 |
Security |
Switch Binary |
Version V2 |
Z-Wave Plus Info V2 |
Технология | Z-Wave+ |
---|---|
Z-Wave Plus: | Нет |
Z-Wave аппаратная платформа | SD3502 |
Z-Wave тип библиотеки | Routing slave |
Z-Wave тип устройства | On/Off Power Switch |
Z-Wave тип роли | Always On Slave |
Производитель | Philio |
Максимальная нагрузка | 12A |
Группы ассоциаций | 3 |
Z-Wave Функции | Power Level |
Внутренняя/наружная установка | Внутренняя |
Тип диммера и выключателя | wall plug |
Источник питания | Кабель AC |
Форм-фактор | Штепсельная Розетка |
Функции розетки | Измерение мощности, Измерение тока, Измерение мощности за период |
Назначение | Управление освещением, Управление энергоснабжением |
OTA обновление прошивки | Да |