Z-Wave Plus Qubino DIN Dimmer

Есть в наличии
SKU
QUB_ZMNHSD
Начиная с 5 890,00 руб.

Z-Wave Qubino Din Dimmer

  • Mosfet Switching (Trailing Edge)
  • Perfect for LED and CFL bulbs
  • Controllable either through a Z-Wave network or from the wall switch
  • Dimming loads from 1W to 200W
  • Extremely low energy consumption
  • Integrated power consumption management
  • Supports connection of digital temperature sensor
  • Easy installation (DIN rail mounting)

Truly universal Z-Wave DIN dimmer

DIN DIMMER

Этот диммер устанавливается на DIN-рейку и используется для включения, выключения и регулирования мощности свечения различных осветительных устройств, а также для управления скоростью вращения лопастей вентилятора. Микромодуль может работать со всеми наиболее распространенными типами ламп: низковольтными галогенными лампами с электронным преобразователем, управляемыми компактными флюоресцентными и светодиодными управляемыми лампами. Также модуль-диммер Qubino поддерживает обычные лампы накаливания, галогенные лампы с напряжением питания 220 В, диммируемые флюресцентные и светодиодные лампы.

Z-Wave Qubino dimmer din

What is it used for?

The Qubino DIN Dimmer is a DIN rail mounted dimmer, ideal for remotely controlling and measuring the power consumption of light bulbs. It also supports the connection of a digital temperature sensor.

Lights

The smallest of them all.

The Qubino DIN Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino DIN Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.

Remarkably versatile.

The Qubino DIN Dimmer can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

din installation

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable module.

Qubino modules are "install-and-forget" products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

 Electrical diagram 230VAC Electrical diagram 24VDC

Widest range of Bulb Types

Qubino Dimer - Bulb Types

 

The Qubino Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types, we've tested it with all of them:

  • Halogen and Incandescent (230V)
  • Dimmable LEDs (230V)
  • Dimmable CFL and Fluorescent (230V)
  • Low Voltage Halogen (24V)
  • Low Voltage LED (24V)

The Qubino Dimmer can be used in the 230V mains lighting system where it uses a 'Trailing Edge' style dimmer to control the lights. It can also be used in a 24V low-voltage system where it it uses PWM style control of the bulbs.


Радиус действия

Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.

Поколение 5

Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.

Безопасность

Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.

Беспроводное обновление

Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.

Technical Specification

  • MODEL NUMBER
    • ZMNHSD
  • HARDWARE
    • Z-Wave Chip 500 series
    • Switching: MOSFET (trailing edge)
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • FEATURES
    • Support for the connection of digital temperature sensor
    • Power consumption measurement
    • 1 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons
  • LED AND BUTTONS
    • LED indicator
    • Include/Exclude button
  • ASSOCIATION GROUP
    • Eleven groups and sixteen devices (nodes)
  • MAXIMUM CURRENT
    • 0,85A/ 230VAC
    • 0.85 A / 30 VDC
  • MAXIMUM LOAD
    • 200 W (230 VAC) (Resistive)
    • 21 W (24 VDC) (Resistive)
    • (Resistive-Inductive)
    • (Resistive-Capacitive)
  • OVERCURRENT PROTECTION
    • required external circuit breaker
  • POWER MEASUREMENT ACCURACY
    • +/-2W
  • DIMENSIONS
    • Package: 21x95x64mm (LxWxH)
    • Unit: 18x93x58mm (LxWxH)
  • CERTIFICATIONS
    • FCC, Z-Wave
  • POWER SUPPLY
    • AC 100-240VAC, 50-60Hz
    • 24–30 VDC
  • POWER CONSUMPTION
    • up to 0.7W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 50m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • -10-40°C
  • FOR INSTALLATION ON
    • DIN rail
  • IP CODE
    • IP20
  • WEIGHT
    • Net: 50
    • Gross: 56g

Package content

  • Unit
  • User manual

Z-Wave Specification

Z-Wave Association Capabilities

Model: DIN Dimmer (ZMNHSD1)

Z-Wave Certification Number: ZC10-17035480


Group ID

Maximum Nodes

Description

1 1 Lifeline group (reserved for communication with the main controller)
2 16 Basic on/off (triggered at change of the input I1 state and reflecting its state)
3 16 Start level change/stop level change (triggered at change of the input I1 state and reflecting its state)
4 16 Multilevel set (triggered at changes of state/value of the DIN Dimmer)
5 16 Multilevel sensor report (triggered at change of temperature sensor)

Z-Wave Configuration Capabilities

Model: DIN Dimmer (ZMNHSD1)

Z-Wave Certification Number: ZC10-17035480


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 1 Input switch type 0
(Default)
Mono-stable switch type (push button)
  1 Bi-stable switch type

Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 2 Activate / deactivate functions ALL ON / ALL OFF 255
(Default)
ALL ON active, ALL OFF active
  0 ALL ON is not active, ALL OFF is not active
  1 ALL ON is not active, ALL OFF active
  2 ALL ON active, ALL OFF is not active

Parameter Number

Parameter Size

Parameter Name

Parameter Values

11 2 Automatic turning off output after set time 0
(Default)
Auto OFF disabled
  1 to 32536 = 1second - 32536 seconds Auto OFF enabled with define time, step is 1 second

Parameter Number

Parameter Size

Parameter Name

Parameter Values

110 2 Temperature sensor offset settings 32536
(Default)
Offset is 0.0 degrees Celsius
  1 to 100 Value from 0.1 degrees Celsius to 10.0 degrees Celsius is added to actual measured temperature
  1001 to 1100 Value from -0.1 degrees Celsius to 10.0 degrees Celsius to -10.0 degrees Celsius to 10.0 degrees Celsius is subtracted to actual measured temperature

Parameter Number

Parameter Size

Parameter Name

Parameter Values

12 2 Automatic turning on output after set time 0
(Default)
Auto ON disabled
  1 to 32535 = 1second - 32535 seconds Auto ON enabled with define time, step is 1 second

Parameter Number

Parameter Size

Parameter Name

Parameter Values

120 1 Digital temperature sensor reporting 5
(Default)
0,5 degrees Celsius change
  0 Reporting disabled
  1 to 127
(Default)
= 0,1 degrees Celsius - 12,7 degrees Celsius, step is 0,1 degrees Celsius

Parameter Number

Parameter Size

Parameter Name

Parameter Values

21 1 Enable/Disable Double click function 0
(Default)
Double click disabled
  1 Double click enabled

Parameter Number

Parameter Size

Parameter Name

Parameter Values

30 1 Saving the state of the device after a power failure 0
(Default)
DIN Dimmer module saves its state before power failure (it returns to the last position saved before a power failure)
  1 DIN Dimmer module does not save the state after a power failure, it returns to "off" position

Parameter Number

Parameter Size

Parameter Name

Parameter Values

40 1 Power reporting in Watts on power change 0 Reporting disabled
  1 to 100
(Default)
= 1% - 100% Reporting enabled

Parameter Number

Parameter Size

Parameter Name

Parameter Values

42 2 Power reporting in Watts by time interval 0
(Default)
Reporting disabled
  1 to 32767 = 1 second - 32767 seconds. Reporting enabled. Power report is send with time interval set by entered value. Please note, that too fast reporting can cause too much Z-Wave traffic resulting in Z-Wave poor response

Parameter Number

Parameter Size

Parameter Name

Parameter Values

5 1 Working mode 0
(Default)
Dimmer mode
  1 Switch mode
  0
(Default)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

60 1 Minimum dimming value 1
(Default)
= 1% (minimum dimming value)
  1 to 98
(Default)
= 1% - 98%, step is 1%. Minimum dimming values is set by entered value.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

61 1 Maximum dimming value 99
(Default)
= 99% (Maximum dimming value)
  2 to 99
(Default)
= 2% - 99%, step is 1%. Maximum dimming values is set by entered value

Parameter Number

Parameter Size

Parameter Name

Parameter Values

65 2 Dimming time (soft on/off) 100
(Default)
= 1s
  50 to 255
(Default)
= 500 mseconds - 2550 mseconds (2,55s), step is 10 mseconds

Parameter Number

Parameter Size

Parameter Name

Parameter Values

66 2 Dimming time when key pressed 3
(Default)
= 3s
  1 to 255
(Default)
1 second - 255 seconds

Parameter Number

Parameter Size

Parameter Name

Parameter Values

67 1 Ignore start level 0
(Default)
Respect start level
  1 Ignore start level

Parameter Number

Parameter Size

Parameter Name

Parameter Values

68 1 Dimming duration 0
(Default)
Dimming duration according to parameter 66
  1 to 127 From 1 to 127 seconds

Z-Wave Command Classes

Model: DIN Dimmer (ZMNHSD1)

Z-Wave Certification Number: ZC10-17035480


Supported Command Classes
 
        All Switch
        Association Group Information V2
        Association V2
        Basic
        Configuration
        Device Reset Local
        Manufacturer Specific V2
        Meter V4
        Multi-Channel_V4
        Multi-Channel-Association_V2
        Powerlevel
        Security
        Sensor Multilevel V7
        Switch Binary
        Switch Multilevel V3
        Version V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic
        Switch Multilevel V3

User manual

Guides

  • Guides
Дополнительная информация
Z-Wave Plus: Нет
Z-Wave аппаратная платформа ZM5202
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства Light Dimmer Switch
Z-Wave тип роли Always On Slave
Технология Z-Wave+
Внутренняя/наружная установка Внутренняя
Производитель Qubino
Группы ассоциаций 11
Z-Wave Функции Multichanel , Multichannel Association, Multilevel
Поддерживаемые типы выключателей/управления Кнопочный, Тумблерный, Кулисный
Максимальная нагрузка 0.85A
Тип диммера и выключателя insert module
Источник питания Кабель AC
Тип проводной системы 3-Wire
Тип вставного модуля Реле - 1 нагрузка
Insert module feature Дополнительные входы, Измерение мощности, Вход для цифрового датчика температуры
Форм-фактор DIN рейка
Назначение Управление освещением
OTA обновление прошивки Да
Напишите ваш собственный отзыв
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2009-2020 Swinestudio. All rights reserved.